Aller au contenu

question sur port AGP


Madgic_2000

Messages recommandés

Manual AGP Comp. Driving

 

Common Options : 00 to FF (Hex numbers), 00h to FFh

 

Quick Review

 

This BIOS feature will only be activated if you set the AGP Comp. Driving Control BIOS feature to Manual. It determines the overall drive strength of the AGP bus.

 

The drive strength is represented by Hex values from 00 to FF (0 to 255 in decimal). The higher the drive strength, the greater the compensation for the motherboard's impedance on the AGP bus.

 

In conjunction with AGP Comp. Driving, this function is used to bypass AGP dynamic compensation in cases where the auto-compensation circuitry cannot provide adequate compensation. If you are using an AGP card built around the NVIDIA GeForce 2 line of GPUs, then it is recommended that you put this feature into Manual mode and set AGP Driving Value to EA (234). For other cards, please check with the manufacturer if your card requires the AGP driving strength to be manually set.

 

Incidentally, increasing the AGP drive strength will not improve the performance of the AGP bus. It is not a performance enhancing feature so you shouldn't increase the AGP drive strength unless you need to.

 

Tout est dit ;-) (meme si t'as une geforce 4 .... peut pas tout faire non plus :lapin: )

Lien vers le commentaire
Partager sur d’autres sites

If you are using an AGP card built around the NVIDIA GeForce 2 line of GPUs, then it is recommended that you put this feature into Manual mode and set AGP Driving Value to EA (234)

 

je suis tombé sur cette info aussi, j'ai donc essayé d'entrer EA dans les paramètre mais rien de plus.

 

 

Lien vers le commentaire
Partager sur d’autres sites

j'aurais du commencer par le commencement

 

c'est à dire m'informer sur le port AGP

 

celui de ma carte mère est un port AGP 1.0

 

et selon mes recherche sur le port AGP, cette version supporte très peu de cartes graphiques. La solution qui me fait mal aux dent rien qu'à y penser est de trouver une carte mère pour P4 socket 478. pas sorti de l'auberge je crois :??:

Lien vers le commentaire
Partager sur d’autres sites

Rejoindre la conversation

Vous pouvez publier maintenant et vous inscrire plus tard. Si vous avez un compte, connectez-vous maintenant pour publier avec votre compte.

Invité
Répondre à ce sujet…

×   Collé en tant que texte enrichi.   Coller en tant que texte brut à la place

  Seulement 75 émoticônes maximum sont autorisées.

×   Votre lien a été automatiquement intégré.   Afficher plutôt comme un lien

×   Votre contenu précédent a été rétabli.   Vider l’éditeur

×   Vous ne pouvez pas directement coller des images. Envoyez-les depuis votre ordinateur ou insérez-les depuis une URL.

×
×
  • Créer...